Archive

Archive for October, 2010

Pen Drive Linux – Ubuntu 9.10

October 15, 2010 Leave a comment

I was trying to install Ubuntu on my sister’s Netbook ASUS Eee 1005P, only way was to have a USB boot.
Here is how we can create a USB Ubuntu Drive.
Download the latest netbook Ubuntu here

  • Insert a USB stick with at least 2GB of free space 
  • 1GB is fine if you are installing Ubuntu, but 2GB recommended if you are not planning to install but to have Live USB.

  • Download the Universal USB Installer
  • Click ‘Run’ when prompted
    • If the security dialog appears, confirm by clicking ‘Run’
    • Read the licence agreement and choose ‘I Agree’ to continue
    • Select Ubuntu Desktop Edition from the dropdown list
    • Click ‘Browse’ and open the downloaded ISO file

    • Choose the USB drive and click ‘Create’
    Once completed.
    Goto the BIOS and set the USB Harddrive as the first priority (Make sure the USB is connected to the Netbook)
    Images Courtesy Ubuntu site
    Categories: How To

    Install chm viewer on Linux

    October 13, 2010 Leave a comment

    I was looking in to a nice socket programming document which we in chm
    , but this does not work in linux so I googled around and found stuff
    below.
    I use the below command ‘apt-get’ on my Ubuntu. But ‘yum’ will work on
    Redhat variants.
    # apt-get install gnochm
    OR
    # apt-get install kchmviewer
    Gnome Desktop User
    $ gnochm file.chm
    KDE Desktop User
    $ kchmviewer file.chm

    Categories: How To

    AsteriskNOW and Cisco 7940G

    October 9, 2010 Leave a comment

    Was working on Asterisk configuration with CISCO 7940 IP phones.
    There are many links which let configure this phone, this is just an overview of what I did to get this up and running
    Configuring AsteriskNow is very simple. Below are the details to setup a IP-PBX.

    Requirement

    1. Old CPU laying somewhere.
    2. IP Phone (Cisco 7940/7960)
    3. DHCP and TFTP Server (for Firmware upgrade)

    Steps

    1. Download AsteriskNOW
    2. Configure Asterisk. (More howto later, for now important is to create users without NAT)
      1. Create a Trunk
      2. Create a Dialplan
      3. Create users (On catch here is when we create a User make sure to uncheck “NAT“)
    3. Configure IP Phone used the link here which is very helpful (Attached are files required firmware / conf files etc).

    Thats it !! IP phone should be up and running.

    Categories: How To, Personal